BQLVM - MOLYBDATE REAGENT, 21073
- MSDS: BQLVM
- Manufacturer: HACH CO
- Product Name: MOLYBDATE REAGENT, 21073
- National Stock Number: 6810-00N036171
Product Identification
Product ID:MOLYBDATE REAGENT, 21073
MSDS Date:03/16/1990
FSC:6810
NIIN:00N036171
MSDS Number: BQLVM
Responsible Party
US
Emergency Phone: 303-623-5716
Info Phone: 800-227-4224
Cage: 4T252
Contractor
Telephone: 800-227-4224
Cage: 4T252
Ingredients
MOLYBDIC ACID, DISODIUM SALT; (SODIUM MOLYBDATE ANHYDROUS)
CAS: 7631-95-0
RTECS: QA5075000
Fraction By Weight: 100%
OSHA PEL 5 MG/M3 (MO)
ACGIH TLV: 5 MG/M3 (MO)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT MAY BE IRRITATING TO
EYES, SKIN & RESPIRATORY TRACT. ACUTE TOX:MODERATELY TOXIC. TARGET
ORGANS:EYES, SKIN, MUCOUS MEMBRANES, RESPIRATORY TRACT, DIGESTIVE
TRACT. CHRONIC TOX:MAY CAUSE GOUT .
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION OF EYES, THROAT, DIFFICULTY IN
BREATHING, LOSS OF COORDINATION, LOSS OF APPETITE, LISTLESSNESS,
DIARRHEA. MAY AFFECT ENZYME ACTIVITY; MAY CAUSE ANEMIA; MAY INDUCE
COPPER DEFICIENCY.
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY CONDITIONS,
BLOOD DISEASE, GOUT MAY BE AGGRAVATED BY EXPOSURE TO MOLYBDENUM
COMPOUNDS.
First Aid
First Aid:EYE:IMMEDIATELY FLUSH W/WATER FOR AT LEAST 15 MINUTES. CALL
MD. SKIN:WASH W/SOAP & PLENTY OF WATER. INGEST:GIVE LARGE
QUANTITIES OF WATER. GIVE AT LEAST 1 OUNCE OF VINEGAR IN AN EQUAL
AMOUNT OF WATER. INDUCE VOMITING BY STICKING FINGER DOWN THROAT.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. CALL MD.
INHAL:REMOVE TO FRESH AIR.
Fire Fighting
Extinguishing Media:WATER, DRY CHEMICAL, ALCOHOL FOAM OR CARBON
DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SWEEP UP POWDER. AVOID BREATHING MATERIAL.
DISSOLVE IN WATER. FLUSH DOWN THE DRAIN W/EXCESS WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. AVOID
CONTACT W/EYES, SKIN & CLOTHING. DO NOT BREATHE CHEMICALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:ADEQUATE VENTILATION.
Protective Gloves:DISPOSABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
PH:9-10 (5% AQUEOUS SOLUTION).
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:1269F,687C
Spec Gravity:3.28
pH:SUPDAT
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE SOLID; NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:MOISTURE.
Hazardous Decomposition Products:NOT DETERMINED.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W ALL FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.